Peak Fly Tying Vice

Online Tackle Shop | Manufacturers | Turrall | Flytying Equipment |  Peak Fly Tying Vice


Peak Rotary Vice with Pedestal Base and Bobbin Rest

This is the vice that started it all, the PEAK Rotary Vice.

Designed for optimal tying efficiency and ease of adjustment and set-up. Materials (including Stainless Steel, Brass, Tool Steel, and Aircraft Aluminum) are chosen to last a lifetime of tying. Hardened and tempered tool steel jaws hold hooks, from size 2/0 (depending on exact hook wire diameter) down to the smallest you can buy, securely. All adjustments are accomplished with minimal effort.


Price: 172.00 (Including VAT at 20%)


Quantity:  

Peak Rotary Vice with Pedestal Base and Bobbin Rest


Peak Fly Tying Vice Accessories

Peak Fly Tying Vice Accessories



1. D Arm - Horizontal Rotary Handle

If you prefer a horizontal handle to a vertical handle, PEAK's D-Arm may be just the accessory you need. Easily assembled with the included tool, this rotating handle will "turbo-charge" your tying. The freely rotating shaft allows you to rotate your vice without having the handle spin in your fingers.


Price: 14.90 (Including VAT at 20%)
Quantity:  

1. D Arm - Horizontal Rotary Handle


2. Material Clip

PEAK's Material Clip is provided with 2 sizes of spring to grip a wider range of materials better. PEAK's straight spring design works better than a conventional wrapped spring, which results in the spring coils forming an inverted "V". PEAK's straight spring leaves parallel coils which will hold your materials more securely. The PEAK Material Clip will fit any 1/4" Diameter shaft. Clips will rotate to any angle needed or completely out of the way and multiple Material Clips can be used in tandem.


Price: 12.35 (Including VAT at 20%)
Quantity:  

2. Material Clip


3. Bobbin Rest Assembly

The PEAK Bobbin Rest Assembly is fast and easy to adjust and fits any vise with a 3/8" diameter shaft.


Price: 21.50 (Including VAT at 20%)
Quantity:  

3. Bobbin Rest Assembly


4. Riser

The Riser allows you 1-3/4" additional height adjustment. Leaving the riser attached to your vise and disassembling it from the Pedestal Base will leave you with a flat base for easier transportation.


Price: 34.40 (Including VAT at 20%)
Quantity:  

4. Riser


5. Accessory Shaft

PEAK's Accessory Shaft is a unique and very useful accessory. It provides a place to mount items such as a light or tool caddy near your work area, but not on your vise. Compatible with both PEAK's Pedestal Base and C-Clamp, the Accessory Shaft will accept any accessory designed to mount to a 3/8" diameter shaft.


Price: 11.25 (Including VAT at 20%)
Quantity:  

5. Accessory Shaft


6. Tool Post Caddy

Here's a useful accessory to help you stay organized and increase your tying output. No more looking for lost tools hidden under your materials, or that have rolled off on the floor. Hang your essential tools right next to your vise, out of the way, but there when you need them. Fits any 3/8" shaft such as your PEAK Vise or PEAK Accessory Shaft.


Price: 10.49 (Including VAT at 20%)
Quantity:  

6. Tool Post Caddy


Peak Brass Screw Kit

Machined brass screws, ideal for use on the PEAK Rotary Vice.
The brass screws add strength to grip and are perfect for the avid tyer.
2 SCREWS PER PACK


Price: 16.99 (Including VAT at 20%)
Quantity:  

Peak Brass Screw Kit


Peak Desktop Caddy

Handy sized fly tying tool tidy

Price: 14.99 (Including VAT at 20%)


Quantity:  

Peak Desktop Caddy


Peak Desktop Caddy and Turrall Tools Offer



Handy sized fly tying tool tidy with a range of H Turrall Fly tying Tools including:

Bobbin Holder

Black Scissors

Dubbing Needle

Tear Drop Hackle Pliers


Price: 22.99 (Including VAT at 20%)


Quantity:  

Peak Desktop Caddy and Turrall Tools Offer


LED Tying Light

PEAK’s LED powered tying light is the best portable lighting solution we’ve found. The LED light source runs cool and provides a wide angle of light to illuminate your entire tying area with minimal power consumption. Even after a full day of tying, the housing remains cool to the touch. No need to worry about burning your hand if you accidentally touch your light. You also won’t feel the heat build up in your tying area that you may from some light sources so tying will be safer and more comfortable. The lamp provides a full spectrum white light that won’t skew the colour properties of the material you’re working with. The bracket mounts to any PEAK vice stem, PEAK’s Accessory Shaft or any other 3/8" diameter vice stem and incorporates an integral tool holder. A 20" flexible neck allows optimal positioning of the light source. The lightweight construction allows the light to be easily transported. Wall transformer provided supplies 500 mA at 9VDC and is rated for 100 – 240 VAC at 47 – 63 Hz input.

Price: 172.00 (Including VAT at 20%)


Quantity:  

LED Tying Light


C Clamp

As with the Pedestal Base you get a better engineered mount. Reverse the lower rabbeted jaw to get a grip range from 2-1/4" to 11/16". Jaws ride on precision guide rods holding the jaw faces parallel, there is no rotating clamp screw bearing against your table to damage the finish. Clamping is accomplished with a large comfortable tri-lobal clamp screw. The deep rabbet engages rounded table edges so your vice won't rock. You won't find a more stable, versatile, robust clamp and it's the only clamp that will accept the accessory post. As one review stated "you could press wheel bearings with this clamp".

Price: 43.00 (Including VAT at 20%)


Quantity:  

C Clamp


Peak Large Hook Conversion Head

PEAK’s custom engineered, award winning revolutionary hook holding technology.
The Large Hook Conversion Head allows a hook to be held under a ‘drawbridge’ rather than between two parallel surfaces.
This is ideal for large hooks and provides an iron tight grip for tying.
The conversion head will fit a standard PEAK rotary vice mounting and is easily interchangeable.
Also know as the Large Iron Retention System or LIRS.mp".

Price: 119.95 (Including VAT at 20%)


Quantity:  

Peak Large Hook Conversion Head


Tube Fly Vice Head

PEAK’s Rotary Tube Fly Vice Head will accept pins and metal tubes up to 1/8” in diameter.

The custom ground pins have a shallow sloped shoulder for capturing the tubing.

No additional pieces are needed, simply push the tubing up the shoulder until it is held snugly.

The vise comes with two pins, 1/32” and 1/16”, other sizes are available separately. Compatible with PEAK’s Pedestal Base or our C-Clamp either option provides the most stable mounting platform available and makes this vise compatible with PEAK’s unique accessories.


Price: 118.25 (Including VAT at 20%)
Quantity:  

Tube Fly Vice Head


Rotary Vice Midge Jaw

These jaws undergo the same hardening and tempering process as our highly acclaimed standard jaw. Our midge jaws are specifically profiled to allow more access to tie on smaller hooks. Not recommended for extended use with hook wires larger than a #16 dry fly hook. Black oxide finish reduces glare in the immediate area of your hook.

Price: 43.00 (Including VAT at 20%)


Quantity:  

Rotary Vice Midge Jaw


Vice Travel Pouch

This pouch is sewn in the USA, in Colorado. It has a heavy duty outer shell of tough Cordura for years of use. The two padded interior compartments separate and protect your vise and accessories. It will hold any of PEAK's vises with the Pedestal Base or the C-Clamp.

Price: 34.40 (Including VAT at 20%)


Quantity:  

Vice Travel Pouch


Pick 'N' Brush

PEAK's combo dubbing tool, the Ritt-Pick-N-Brush is almost a necessity on any bench. It incorporates a nylon dubbing brush, bodkin needle and half hitch tool in one package. The nylon brush is more gentle on thread and hackle than metal brushes. The Ritt Pick-N-Brush allows you to carry less tools for more functions.

Price: 14.90 (Including VAT at 20%)


Quantity:  

Pick 'N' Brush


Peak Profile Plate

The PEAK Profile Plate provides a high contrast background allowing you to easily observe the details of your fly regardless of any “visual clutter” that may accumulate on your tying table. The end result is you will find you can tie longer and more comfortably and accurately.

Price: 25.99 (Including VAT at 20%)


Quantity:  

Peak Profile Plate


Peak Hex Hair Stacker

PEAK has applied their straightforward and thorough design principles to their Hex Stacker to make even the simplest of tools unique and more functional. The non-plated aluminum body won’t build up static, so hair doesn’t cling to the tube. Both the top and bottom of the PEAK Hex Stacker are hexagonal so neither end will roll off your table.
Designed manufactured assembled in USA Loveland Colorado

Price: 23.99 (Including VAT at 20%)


Quantity:  

Peak Hex Hair Stacker


Peak Waste Catcher

PEAK Waste Catcher
They considered naming this accessory the “PEAK Marriage Saver”. Having one of these in your tying arsenal will go a long way toward promoting harmony in the household. Quit searching for tools and materials in the waste that accumulates under your vise. The PEAK Waste Catcher keeps your tying area free of loose clippings making clean-up easier and faster. The bag material is durable white nylon and is easily removed to empty accumulated waste. The white color also provides an excellent visual backdrop. Using this will make any fly-tying area tidier and more efficient

Designed manufactured assembled in USA Loveland Colorado

Price: 33.95 (Including VAT at 20%)


Quantity:  

Peak Waste Catcher