Loop OPTi Fly Vest - Details

Back To Fly Fishing Waistcoats
Loop OPTi Fly Vest
BASE LAYER
When being active we produce sweat. Therefore it is important that the layer closest to the skin is perspiration transporting, in order to move the moist away from the body. Preventing an uncomfortable damp feeling. To get the full benefit of a wearing a waterproof and breathable shell garment as outer layer we recommend wearing a base layer with good wicking ability that leads moist away.Synthetic fabrics such as polyester and nylon have very good wicking abilities, whereas cotton tends to absorb moist.

MID LAYER (2nd LAYER)
In colder conditions where a base layer is not enough to keep you warm under the shell garment a mid layer is used to provide extra isolation keeping you warm and cosy. It is also important that the mid layer has good wicking abilities and hence can move moist away from the body. A good choice for a mid layer could be a bonded fleece or a soft shell jacket. These types of garments will not only keep you warm but also protect you from chilly winds and in the case of the soft shell even light showers.

SHELL GARMENTS (3rd LAYER)
The outer layer (or shell layer) must provide protection against wind and rain keeping the elements out. But when the garment is used for physical activity it is equally important that evaporation can take place unhindered. So the moisture wicked from the skin through the base layer or mid layer can escape. All of our shell garments are provided with an extremely waterproof and windproof membrane which at the same time is also highly breathable. Helping to keep you warm and dry at all times and still allowing you to get rid of access body heat. Choices for shell garments could be a garment made of a 2 layer fabric with a light mesh or taffeta polyester lining. An excellent choice for shell garment could also be a garment made of a lighter 3 layer fabric where a very thin mesh lining has been bonded directly to the backside of the laminated fabric to protect the membrane.

Or if very light weight and volume is required a garment made of thin 2 ½ layer fabric, that thanks to a thin carbon layer covering the membrane also works without lining. The thin fabric and light weight on 2 ½ layer garments makes them very comfortable to wear but also handy to pack down when travelling.
It should be noted though that for colder windy climates thin 2 1/2 layer fabrics have less isolation ability, as thicker fabrics will help to hold an isolating layer of air between you body and the shell fabric.

• Lightweight, quick dry nylon fabric.
• Stretchable, load-bearing fabric on shoulders for comfort.
• Non-crushable neoprene collar that will not retain water.
• 3 large, vertical front pockets.
• Foam fly patch.
• Zipper and buckle closure at front.
• D-ring on back.
• 2 tippet pockets.
• 1 welded outer zipper pocket.
• Tool arrangement with 2 retractors and 2 straps to arrange your tools on the front of the left chest pocket.
• 2 zipped pockets on the back.
• 1 large back pocket.
• Detachable back piece with mesh lining inside.
• 2 large zipped pockets inside.
• 2 logo embossed Velcro bands on front.
• Comes with a dry pouch bag.
• Colour: light green and orange.

In order to get the full benefit of a technical membrane shell garment and ensure long lasting functionality we recommend you always to follow these simple care directions:

• Please avoid extensive washing. To remove light dirt just use a damp cloth.
• Machine wash warm and rinse thoroughly (consult the care label for additional instructions).
• All off our waterproof garments has a durable water repellent surface but after washing we recommend from time to time to restore the water repellent surface by adding a water repellent restorative for outdoor fabrics. This will extend the useful lifespan of your garment.
• When washing please do not use fabric softener, as this tends to clog up the fine pores in the membrane making it less breathable.
• Before stowing away always allow your garment to dry fully.